A simulated engine on a dyno, run by a standalone ECU you tune yourself. Change the fuel map, the timing or the boost and watch what happens to the power curve, the mixture and the knock sensor.
It behaves like the real thing. The engine model runs every combustion event. Lean it out and it misfires. Add too much timing and it knocks, then cracks a piston. Fit bigger injectors without telling the ECU and it floods.
THE ECU
- Fuel VE, lambda targets, ignition, boost target and wastegate duty, idle, warmup, cranking, accel enrichment and dead times
- Closed loop, knock control, rev and boost limiters, auto learn and "Fix from pull"
- Select cells, drag curves, type values, interpolate and smooth, in a grid or in 3D
- Lay the data log over any table and see which cells ran lean or knocked…
From the developer’s store description.